Safety Guide

When first introduced to the concept of glass dildos, the perception is that glass is fragile and therefore a glass dildo might break in their most sensitive area causing untold damage. I would like to take this opportunity to set these fears to rest. There is absolutely no way a glass dildo will break under normal usage.

Let me explain - Standard glass is made from sand, sodium carbon and calcium carbonate - commonly known as soda lime glass. glass dildos on the other hand are formed from a much stronger material known as borosilicate glass made from a much purer type of silica sand to which 5-10% boron oxide has been added. This gives it greatly improved resistance to chemical corrosion and also enables it to withstand great fluctuations in temperature. In fact, it actually becomes stronger at sub-zero temperatures.

glass dildos are safest sex toys which are in demand around the world. Glass dildo offers the smoothest surface and excellent pleasure in sensitive areas. No rough edges are being designed on these sex toys so you don't have to be worried about this while using them. glass dildos are non porous and will not absorb the lubricant you are using on it. They warm up to your body temperature easily in just few minutes. Glass dildo is long time investment if taken care of.

How do I clean and maintain my Pyrex glass dildo

Cleanliness is one of the most important points in choosing glass over rubber or plastic sex toys. We always recommend that your sex toys cleaned before and after each use. We recommend that you use a antibacterial sex toy cleaner but if you'd like to keep it as simple as possible you could use warm water with a mild soap, something that won't cause any sort of negative reaction or irritation the next time you would use it. Then just dry it with a soft towel. Pyrex is so versatile that you can even put them in a dishwasher if you would like. We discourages people from sharing sex toys, but if you must, use rubbing alcohol, bleach, or the boiling method to sterilize between uses. Pat dry with a soft towel and store until the next use. If your piece is for display only a weekly dusting followed by an occasional thorough cleaning with a window cleaner is your best bet. Each glass dildo is designed to last forever but always use care as they are very slippery when wet and soaped up and could be damaged if you drop them on a hard enough surface.

Some people fear that glass dildo may somewhat be dangerous to their health in case it breaks. Although that shouldn't happen to you as these dildos were not meant for risky experiments, non-sophisticated safety rules will be helpful to you if you want to prolong your sex toy's lifetime. In case you've noticed any sign of nicks, put off any fun with glass toy as this may end up in a hospital bed.

Store your glass dildo wrapped in a soft cloth or box to prevent it from any accidents and give your treasure long lifespan.

Glass is very hard and will hurt if you hit the pelvic bone the wrong way. And, although the glass dildo will not break, intimate body parts can so avoid extremely rough activities.

How do I heat my Pyrex up safely?

Since Pyrex glass insulates and holds temperatures, warming your piece may provide additional sensory stimulation. The most safe and proper way to heat your Pyrex glass takes about 30 minutes. Make sure your Pyrex glass is at room temperature to start. Get a large bowl or pan and add very warm tap water directly from the sink to bowl. Completely submerge the Pyrex glass in warm water for about 5 minutes. Carefully pour out 1/2 to 2/3rds of the water from the bowl, leaving the glass partially under water. Fill remainder of bowl with boiling water and allow it to set for 20-25 minutes away from heat. Always test temperature before using Pyrex glass as it can burn skin at high heat.   

Avoid extreme temperature shocks and always test on your forearm before using on intimate body parts. Using other heat sources or directly freezing your glass dildo is not recommended.

How do I cool my Pyrex glass down safely?

Since Pyrex glass insulates and holds temperatures, cooling your piece may provide additional sensory stimulation. Use the same process to safely cool your piece as you used to heat it, only you will be substituting cool tap water for the very warm tap water and ice water complete with ice cubes instead of boiling water. This Process should also take about a half an hour.  

visit www.pyrexglasstoys.com for  more information